DIY sticker pack with Mustard x Cricut

A small white locker is covered in pink decals in various shapes including flowers, rainbows and hearts. There is a pastel wooden rainbow and a wooden toy car on top.

Our rainbow of lockers is already a pretty delightful sight, but there's always room for more joy! These stickers will dress up your locker and brighten up your day. Minimalists, look away now!

We've teamed up with Cricut to create a downloadable pack of custom-made happy stickers, ready to be cheerfully plastered across your locker of choice.

You might have seen us using these designs on our Instagram stickers and filters, but now we're sharing them with you. We can't wait to see what you create with them!

A flat lay with a lilac background shows a Cricut machine and laptop along with rolls of vinyl, scissors and Cricut tools.

what you need:

step by step:

A close up of a person's hands feeding a sheet of pastel pink vinyl into a Cricut machine.

one.

Using either your laptop, desktop, phone or tablet, import our downloadable happy stickers template into the Cricut Design Space app. This design has been arranged with the stickers tightly positioned to minimise vinyl waste. Once it's set up, load your vinyl into the Cricut machine.

A close up of hands peeling the backing off a sheet of vinyl with decal shapes cut out.

two.

Using the weeding tool, carefully remove the negative space.

A close up of hands applying transfer tape over a sticker decal and using the scraping tool to remove any air bubbles.

three.

Cut the vinyl designs into smaller, individual stickers. Then apply Transfer Tape over each piece, using the scraping tool to make sure the application is smooth, with no air bubbles. Slow and steady is usually the best method here!

A close up of a person wearing a lilac jumper and applying decals to the front of a locker.

four.

One sticker at a time, remove the backing from the vinyl, and position it wherever makes you happy! Press the design down and slowly work across the surface with the scraper tool. Peel off the Transfer Tape (you can save this to reuse a few more times), and repeat this process for as many stickers as you'd like.