how to build videos
Here's our very helpful how-to videos where Becca + Jess will walk you through building your locker. Mustard Made flat pack is simple, all you need is a crosshead screwdriver + a can-do attitude! Watch the video through before you start then have it on hand to guide you as you go.
It's easy. You got this.
We've made our instructions as helpful as we possibly could!
We want to make building your locker stress free.
You can download all our instructions below.
Here's some handy hints for the bits some people get stuck on.
How do I remove the top?
If you ever need to take the locker apart you'll have to take the top panel off. It's the only tricky bit but once you've watched this video you'll know what to do + the rest is easy!
The door isn't fitting in right?
This is most likely because the little hole in the leg is on the wrong side. You need the holes to be closest to the front. To fix this you'll need to push up the base from underneath + remove it. You'll then be able to push the leg out so you can turn it around the correct way.
I can't get the top on?
It can take a little bit of jiggling to get the top in the right place. The key thing is to make sure the two sides + the back are slotted into the grooves on the inside. Check this carefully + when you are happy they are all in place, push down hard.
If any part is not correctly slotted into the grooves, push the panel up and realign. If you need to remove the top watch the video above for tips.
Why does the door keep falling off?
This one is easy! At the top of the door you just need to bend up the little tab to hold the L-shape bracket in place.
I've lost/I'm missing a bit!?Don't worry, we have lots of spare parts!
Just email us at email@example.com, tell us what you are missing
+ your postage details, we can send you what you need!
There's lots more juicy info on our Frequently Asked Questions page too!
Still not sure? Email us at firstname.lastname@example.org